![]() (An IP from your network that is not used by any computer or the router).Įxample (assuming DD-WRT LAN address 192.168.111.1): 192.168.111.2 Them go back to the latest working setting. If its working increase the MTU to the values the connection doesnt work anymore correctly. Set them to 1300 and ceck the connection. DSL, Coax, Fiber, etc, you will have to adjust the values to the correct working settings. If you like to use pptp on other (wan) connections, e.g. The default values are valid for ethernet paket networks with an MTU of 1500 Byte. These settings are very important for correct working connections. Setting DNS2 is optional.Īdd your local WINS servers. When encyption is disabled encryption to clients is allwed but not forced.Īdd your local/wan DNS server. This will increase cpu load a lot and is not recommend.ĭD-WRT forces clients to use encyption with 128bit. When enabled bcrelay will relay all broadcast messages to the default bridge network. In disabled mode pptd-server does set proxy-arp which works for broadcasting in most cases. There are some options you need to know if you would like to setup e.g. Many other operating systems will not work and trying to connect from a LAN port will not work.Īny questions can be posted on the forums or go to log in, search for "Marcelo Semino" (Public Figure), Became a fan of me, an then I will help you with your VPN problem for free. NOTE: After you have done this, only computers the Windows Operating System will be able to connect through the WAN port of the router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |